Do You Know Some Basic Knowledge Of Aluminum Radiator?

What is an aluminum radiator?

The radiator is a general term for a series of devices used to conduct and release heat. With the rapid development of industrial mechanization, the development of radiators is getting faster and faster. In our daily life, radiators are ubiquitous, and automobiles are dissipating heat. radiator, communication base radiator, locomotive radiator, wind radiator, power radiator, electronic radiator, electrical radiator, LED lamp radiator, mechanical equipment radiator, new energy radiator, power semiconductor radiator, inverter cooling radiator, CNC machine tool radiator… CPUs, graphics cards, motherboard chipsets, hard drives, chassis, power supplies, and even optical drives and memory in computers will require radiators. It can be said that radiators are laid out in every corner of our lives and their application range is sufficient widely.     extruded aluminum heatsink     extruded aluminum heatsink 

At present, extruded aluminum profiles are commonly used to make radiators on the market. The cooling fins can be made very thin, and the heat dissipation area can be expanded to the greatest extent. When the cooling fins work, air convection is automatically formed to diffuse heat, and the heat dissipation effect is very good. The radiator aluminum profiles are mainly sunflower shapes, flat wide shapes, round shapes, comb shapes, fishbone shapes, fin shapes, and so on.

The sunflower shape of the radiator can increase the contact between the heat sink and the air so that it can receive the airflow more evenly and smoothly, and take away the heat more evenly. This kind of heat dissipation effect is very fast and the effect is quite obvious, which is very suitable for new components to dissipate heat. Sunflower aluminum radiators are widely used in inverters, new energy, power electronics, communications, and other fields.

 aluminum heatsink extrusion profiles   aluminum heatsink extrusion profiles   aluminum heatsink extrusion profiles

Aluminum profiles have the advantages of easy processing and recycling, strong plasticity, easy extrusion, can be extruded into various shapes of radiators, exquisite appearance, and strong decoration, etc., which are very in line with the requirements of sustainable development in my country. Material application is extremely suitable; radiator aluminum profiles are widely used in various fields, such as the machinery industry, electronic appliances, wind power generation machines, rail transit industry, automobile industry, communication launch, new energy fields, etc.

   

                    How to choose a high-quality aluminum radiator?

With the wide application of aluminum profile radiators in the market, the manufacturers of aluminum profile radiators are constantly emerging, and the accompanying brands of aluminum profile radiators on the market are also varied. Therefore, how to purchase high-quality aluminum radiators has become the focus of many buyers and customers. I hope some basic knowledge of screening aluminum radiators will be helpful to you.

  aluminum heatsink extrusion profiles     aluminum heatsink extrusion profiles    aluminum heatsink extrusion profiles

·When purchasing an aluminum profile radiator product, you need to first check whether it has a factory certificate, and then check the factory date, product specifications, technical conditions used, the name of the company, and the production license number to ensure that you have purchased it. The aluminum profile radiator is made by regular processing procedures.

·Carefully check the surface condition of the aluminum radiator to see if it meets the high-quality standard. The surface of the high-quality aluminum radiator is bright in color, beautiful in luster, and free from scratches, scratches, bubbles, and other defects.

·Pay attention to checking the wall thickness of the aluminum profile radiator and the thickness of the surface layer. The general specification is that the film thickness of anodized products should not be less than 10µm, electrophoretic paint products should not be less than 17µm, and the thickness of the powder coating layer should be It should not exceed the range of 40-120µm. Common fluorocarbon spray products should be above the second coating, and cannot be less than 30µm.

·When users in coastal areas choose aluminum radiators, it is best to use electrophoretic-painted aluminum radiators, powder-sprayed aluminum radiators, or fluorocarbon-sprayed aluminum radiators with better corrosion resistance.

 aluminum heatsink， aluminum extrusion heatsink   aluminum heatsink， aluminum extrusion heatsink

What surface treatment methods are there in the production and processing of aluminum radiators?

 

Aluminum radiators are more and more popular with merchants in the radiator market. At the same time, because different customers have different production requirements for radiators, and the special requirements of customers on products make the surface treatment process of aluminum radiators different, then you Do you know what surface treatments are used in the production and processing of aluminum radiators?

·Electroplating method of metal composite materials: more extensive. In addition, there is a process of electroplating after polishing.    custom heatsink manufacturer   custom heatsink manufacturer  custom heatsink manufacturer

·Oxidation (coloring): The scope of application of oxidation of aluminum radiator surface treatment is divided into two aspects, improving physical properties and ensuring the purpose of paint.

·Rubbing pattern: It is called stainless steel wire drawing. Similar to the car pattern, it is a smooth continuous pattern on the surface. The difference is that the car pattern is circular, and the rubbing pattern is a straight-line pattern.

·Sandblasting process: The purpose of aluminum surface treatment is to solve and cover some defects caused by aluminum profiles in the whole process of machining, manufacturing, and manufacturing, and taking into account some special requirements of consumers for product appearance. There is glass sand, tungsten sand, etc., showing a different feeling, similar to the rough texture of frosted glass, and fine sand molds can show high-end products.

·The polishing treatment solves the defects of grinding, polishing, and making the surface bright.

·Textured aluminum surface treatment is a solution for re-manufacturing after the mold shell is formed. The CNC lathe is used to process the texture, and the overall performance is extremely periodic texture characteristics.

The aluminum profile radiator can be analyzed for surface information processing of various materials. There are many varieties of colors, and there are no solder joints. It is highly decorative, beautiful, and durable. Polishing, surface as anodizing, hard oxidation technology, and other processing and production processes, to create a more beautiful aluminum radiator

  aluminum heat sink suppliers    aluminum heat sink suppliers   aluminum heat sink suppliers

           About Aluminum Extrusion Radiator Profiles

 

Aluminum extrusion radiator profiles: Aluminum alloys are widely used in radiator materials because of their lightweight and beautiful appearance, good thermal conductivity, and easy processing into complex shapes. There are three main types of aluminum alloy radiator materials: flat and wide, comb-shaped or fishbone; round or oval with radial and dendritic fins. Their common features are: the distance between the heat sinks is short, a groove is formed between two adjacent heat sinks, and its aspect ratio is large; the wall thickness difference is large, the heat sink is generally thin, and the bottom plate at the root is thicker, It brings great difficulty to the mold design, manufacture and production of radiator profiles.

Some of the radiator profiles are smaller in size and symmetrical in shape, which is easier to produce. Most of the radiator profiles are flat and wide, with large dimensions, some are asymmetrical, and the grooves between the fins have a large aspect ratio. Its production is difficult. It is necessary to cooperate from ingot casting, die, and extrusion processes to successfully produce radiator profiles. The alloy used for extruding radiator profiles must have good extrudability and thermal conductivity, usually 6063 alloy material, which has good extrudability, thermal conductivity, and good mechanical properties.

The production of aluminum alloy radiator profiles should start from the quality of the ingot, the material and design of the mold, the reduction of the extrusion force, and the extrusion process.

 

Requirements for ingot quality:

The alloy composition of the ingot should strictly control the impurity content to ensure the purity of the alloy composition. For the 6063 alloys, the content of Fe, Mg, and Si should be controlled. The Fe content should be less than 0.2%, the content of Mg and Si are generally controlled at the lower limit of the national standard, the content of Mg is 0.45%-0.55%, and the content of Si is 0.25%-0.35%. The organization and performance are uniforms.

The surface of the ingot should be smooth, no segregation tumor or sticky sand and mud is allowed. The end face of the ingot should be flat, and it should not be cut into steps or too steep. Because the step shape or the inclination of the cut is too large, when extruding the heat dissipation profile with a flat die, if there is no design guide, the ingot directly touches the mold. If the stress is too concentrated, it is easy to break the tooth shape of the mold or cause the discharge sequence to be different, and it is easy to block the mold or the extrusion molding is not good.

Requirements for the mold:

Because the molds of the radiator profiles are made of many slender teeth, they must bear a large extrusion force, and each tooth must have high strength and toughness. Those teeth with poor strength or toughness are prone to fracture, so the quality of the die steel must be reliable.

For the radiator profile to be successfully extruded, the key is to design the mold reasonably, manufacture it accurately, and avoid the ingot being directly extruded onto the mold working belt.

For a section with a relatively mature design, it is also a good method to use an inlaid alloy steel mold, because the alloy steel mold has better rigidity and wear resistance, and is not easy to deform, which is conducive to the forming of the radiator profile.

Reduce squeezing force:

To prevent the broken teeth of the die, the extrusion force should be reduced as much as possible, and the extrusion force is related to the length of the ingot, the deformation resistance of the alloy, the state of the ingot, and the degree of deformation. It should not be too long, about 0.6~0.85 times the normal cast rod, especially when trying out the mold and extruding the first cast rod, to ensure the smooth production of qualified products, it is best to use a shorter cast rod to test mold.

Extrusion process: The key to the production of radiator profiles is the first trial of the extrusion die. If conditions permit, you can first do a simulation test on the computer to see if the working belt of the die design is reasonable, and then try the die on the extruder. . The first mold trial is extremely important. The operator should let the main plunger move forward and move slowly at a low pressure lower than 8MPa. It is best to have someone watch the exit of the mold with a torch light and wait for each extrusion to die. After a heat sink is uniformly extruded into the die hole, the extrusion can be gradually accelerated and accelerated. When continuing to extrude after a successful mold trial, attention should be paid to controlling the extrusion strength to achieve smooth operation. When producing radiator profiles, attention should be paid to the heating temperature of the mold, and the mold temperature should be close to the ingot temperature. If the temperature difference is too large, the temperature of the metal will drop due to the slow extrusion speed during the upper pressure, and the phenomenon of die blockage or uneven flow rate will easily occur.

 

What are the advantages of CNC machining aluminum radiators?

Those who are familiar with the aluminum profile industry often hear the word ‘CNC’ machining, but even if you hear a lot, you may not understand what CNC machining is, and what are the advantages of CNC machining. Let’s take a look at CNC together so that everyone has a Deeper understanding.

CNC machining is also called CNC machining. It is a machining method that uses CNC machining tools. Since the operation of CNC machining is controlled by a computer after programming, CNC machining has stable quality and high precision. At the same time, it can also process complex products, and the processing efficiency is high.

The normal processing technology to produce good products requires complicated processes. Take the radiator panel as an example, the selection of product specifications such as its cutting route and shape must be carefully selected. After confirmation In the execution of specific operations, errors should be taken into account, which will greatly reduce the efficiency; however, after adding the CNC machining process, the process is controlled through program design. After the programming is completed, each step can be done in an orderly manner. The operation of the machine, so that the work efficiency will not be reduced due to manual operations, and it is a good player in processing and production.

Nowadays, with the improvement of people’s aesthetics, customers have high requirements for the radiator in addition to the performance, and appearance of the radiator has high requirements. To meet the special customization requirements of customers, CNC machining can ensure stable product quality. It can ensure the beauty of the product, metal texture, and no damage to the surface. It can be achieved by CNC machining, and its heat dissipation strength will not be changed. This is because the manufacturer can add oxidation, wire drawing, and other processes under several operations, which perfectly guarantees the product’s quality. Quality and appearance. 

       Can aluminum profile radiators be custom processed?

As a custom manufacturer of aluminum profile radiators, the answer is of course! Today, the aluminum profiles of the radiators can be customized professionally, and the related aluminum profile radiators can be customized according to the drawings or samples provided by customers to meet their needs of customers. Use special equipment Aluminum profiles, and customized processing services to ensure a heat dissipation effect.

At present, in addition to aluminum profile radiators, many other radiators can be customized by aluminum profile manufacturers, including electronic radiators, computer radiators, electrical radiators, computer CPU radiators, computer graphics radiators, sunflower aluminum radiators, LED radiators, power semiconductor radiators, CNC machine tool radiators, communication base radiators, electric vehicle radiators, and other related products.

 

Although it is customized, customers must also want to know what our customized aluminum radiator looks like, or whether other aspects other than the model size can be safely produced according to customized requirements, we are a high-quality aluminum radiator supplier Today, I will take you to see the content about the customs processing and production of aluminum profile radiators

·Appearance and appearance, there are many styles in this area, mainly according to Party B’s drawings to determine the specific dimensions and specifications of the aluminum radiator. Another special advantage is that the length of our radiator can be cut at will, and we can make holes and cut holes according to the needs of buyers to meet the reasonable needs of customers for the appearance of aluminum radiators.

·Color, most of the customized aluminum radiators are silver white and black, and the proofing is generally the default silver white treatment. The products have various colors, and other colors can be customized. Because aluminum radiators are generally used in machines, the specific color requirements are not high, the key is to be accurate in size.

·Batch customization of fine aluminum profile processing, which can be finely processed and aluminum profile designed according to customer drawings. Factory direct sales can be customized by drawing and mold opening. After the surface of the processed aluminum radiator is anodized, the corrosion resistance, wear resistance, and aesthetics of the aluminum are greatly improved, which can meet the needs of on-site delivery.

The aluminum profile industry is booming. As an important application material in the fields of electronic products and the machinery industry, aluminum profiles make China the largest aluminum profile production base and consumer market in the world. As we all know, aluminum profiles, as downstream processed products in the aluminum industry chain, are mainly purchased from aluminum rods and electrolytic aluminum. Aluminum rods are hot-melted and extruded to obtain aluminum materials with different cross-sectional shapes. The production process is continuously improved. It is a metal raw material widely used in all walks of life in modern times.

An aluminum radiator is also called a radiator aluminum profile or sunflower aluminum profile. The aluminum profile radiator has the characteristics of a beautiful appearance, is lightweight, has good heat dissipation performance, and good energy-saving effect. The surface of the processed aluminum radiator is anodized, which increases the corrosion resistance, wear resistance, and aesthetics of the aluminum.

With the development of society, there will be more aluminum profile products applied to various fields of production and life, bringing us greater convenience.